|
Post by thawney on May 23, 2022 14:05:25 GMT
Hi, it's me again (sorry). We are now having issues with our speed hall effect sensor.
I have checked and it works fine if put into the RPM slot on the pcb but the speed does not work in the speed slor. When connecting via the eChook app speed is fully greyed out. Is this something I need to change in the code?
|
|
|
Post by Rowan on May 25, 2022 6:51:52 GMT
Hey - The speed in the app changes colour depending on it's value, being greyed out doesn't actually mean very much. There isn't a method to disable it in code, it just displays a value if it receives one.
My first port of call would be tracing the signal back on the PCB, checking that you have continuity between the terminal and R19, the other side of R19 has continuity to pin 3 on the Arduino and that the resistor values are correct etc.
|
|
|
Post by thawney on May 25, 2022 13:17:49 GMT
Hi thanks! Should have specified I meant greyed out as in there's no data there - even on GPS speed mode we get no readings.
|
|
|
Post by Rowan on May 25, 2022 13:29:20 GMT
By GPS mode, you mean if you've selected the 'Display GPS Speed' in the app settings?
|
|
|
Post by thawney on May 25, 2022 19:30:52 GMT
Yes I do mean that, have I misunderstood it?
|
|
|
Post by Rowan on May 25, 2022 20:36:23 GMT
Nope, that should give you the GPS speed on the display! I'll take a look into it tomorrow, see if I can replicate it.
|
|
|
Post by Rowan on May 29, 2022 13:16:08 GMT
Replicated! Looks like that broke in the last app update. I'll take a look at fixing it.
While the GPS speed is out of action in the app. In the mean time the best course of action would probably be to work out why the speed input circuit isn't working - I'm afraid to say that will probably be quicker than an app update.
|
|
|
Post by thawney on Jun 14, 2022 13:40:14 GMT
Replicated! Looks like that broke in the last app update. I'll take a look at fixing it. While the GPS speed is out of action in the app. In the mean time the best course of action would probably be to work out why the speed input circuit isn't working - I'm afraid to say that will probably be quicker than an app update. Ok thanks!! Please keep me posted on when you fix the app!
|
|